Fall DEALS -- Call or text (1-844-493-7633) to find your best deal

0

Your Cart is Empty

SAH3000C1

Mr. Steam 3kW Steam@Home Series Steam Shower Generator Package SAH3000

Estimated to ship:

Call or text anytime 1-844-HYDRO-33 (1-844-493-7633)

LOWEST PRICE GUARANTEE

On/off control and steam head included! The Mr Steam SAH3000 3kW home steam shower generator package is engineered for use in home steam baths with dimensions up to 75 adjusted cubic feet (ACF). Made in U.S.A.

The Steam at Home generator package comes complete with a steam generator, a polished chrome steam outlet head with acrylic shield, chrome SteamStart control, durable electronic components, and a variety of other noteworthy features.

The Mr. Steam SAH3000 generator is constructed of durable stainless steel throughout for years of safe, reliable, and maintenance-free operation. The steam unit is equipped with a built-in drain valve for added safety.

Mr. Steam Steam at Home generators use less than one gallon of water during a 20-minute bathing session, making them both economical and ecofriendly.

When engineering this product, Mr. Steam focused on providing homeowners with a reliable and consistent steam bathing experience. This all-in-one steam shower unit provides all the necessary components to create a luxury steam shower at an affordable price.

The compact Steam@Home 3000 generator fits conveniently out of sight, making it the perfect option for starter homes, guest baths, and smaller residential steam rooms. The unit can be installed up to 60 feet away from the steam shower, in closets, vanities, and other similar locations.

The Steam at Home 3000 3kW steam bath generator is available in either 240V single-phase (1PH) configuration.

The Mr. Steam SAH3000 steam generator carries a limited lifetime warranty and is fully serviceable. Mr. Steam generators are UL listed in the USA and Canada for your safety.

SAH3000 Generator

  • Unitized stainless steel reservoir
  • Durable electronic components
  • Electronic water-level control system
  • Stainless steel design inside and out
  • Low voltage safety control circuits
  • Built in 24-volt circuit
  • ASME safety valve
  • Full port drain valve
  • UL/CSA/CE listed

SteamStart Control

  • On/Off operation
  • 20-Minute run cycle non-adjustable
  • Low profile
  • Polished Chrome trim
  • Inside/outside the steam/shower enclosure installation
  • Low voltage operation

Cool-to-the-Touch Steamhead

  • Quieter operation
  • Integral reservoir for a scented steam bath
  • Low profile and sleek design
  • Polished Chrome finish

Acrylic Shield

  • Clear Lexan construction, 1/8” thick, transparent look
  • Measures 4-3/8" in diameter and is 1/2" deep
  • Integral, 1-5/8” diameter mounting hole

Package Includes

  • 3.0KW Steam bath generator
  • SteamStart surface-mounted control, 1-1/2” diameter, 1/8” deep
  • 3-Pin Control cable, 30’ long, hard-wired to control with plug-in connector
  • Cool-to-the-Touch steamhead, 1/2” NPT, 3-1/16” diameter, 1-13/16” deep
  • Acrylic shield, 4-3/8" diameter, 1/2" deep
  • RTV silicone sealant, .5 ounce tube
  • Installation and operation manual
  • Limited warranty
Model SAH3000
Maximum Adjusted Cubic Feet 75
Kilowatt Rating (KW) 3.0 KW
Shipping Weight 25 lbs
Electrical Specifications (refer to Electrical chart)
Water Supply Connection 3/8" NPT
Generator Steam Line Connection 3/8" NPT
Steam Head Connection 1/2" NPT
Drain Connection 1/4" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve PSIG 15 PSIG
Control "Rough In" Cut Out 7/8" Diameter
Generator Control Connection 3-Pin, Plug-In Connector
Generator Control Cable 30', 3 Conductor, 24 AWG, Shielded Cable
Width 14-3/8"
Depth 5-3/16"
Height 14-7/8"
Adjustable Time No
Session Timing 20 minutes

See general installation guide,manual andspecification.
See planning guide, benefits brochure and steam benefits brochure.
See warranty.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

WHY YOU SHOULD BUY WITH US